The 2014 Toyota Highlander maintenance required soon light comes on when the vehicle is coming due or past due for an oil change service.  Depending on the model, follow the instructions below to reset the 2014 Toyota Highlander maintenance required soon light:

Vehicles without smart key system

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off. (Go to step 3)

Vehicles with smart key system

1. Press the “ENGINE START STOP” switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).

Without multi-information display: Continue to press and hold the button until the trip meter displays “000000”.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles with colour multi-information display

1. With the engine running, use the controls on the right side of the steering wheel to switch the display to SETTINGS.
2. Select MAINTENANCE SYSTEM from the SETTINGS menu.
3. Select YES to reset the system.
4. When the reset is complete “Initialization Completed” will be displayed.

Hybrid

1. Press the “POWER” switch once (do not start engine).
2.Turn off the hybrid system with the trip meter A reading shown.
3. Ensure Trip Metre A reading is shown. Turn the ignition off.
4. While holding down the trip meter reset knob the “POWER” switch must be set in ON mode (do not start engine). Continue to press and hold until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.