The 2015 Chrysler 200 oil change reminder light comes on when the vehicle is due or past due for an oil change service. After performing an oil change, follow these instructions to reset the light:
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following Purolator filters are used on this vehicle:
| Filter Type | Part # (2.4L) | Part # (3.6L) |
| Oil Filter | L12222 | L36296 |
| Air Filter | A28164 | A28164 |
| Cabin Filter | C38185 | C38185 |
Oil Specification
The oil specs for this vehicle have been taken directly from the owner’s manual. More details around oil, torque, tires, and specifications can be referenced in the owner’s manual.
Cabin Filter Replacement
Follow these instructions to replace the cabin filter:
