After performing the oil change the “Change Engine Oil Soon” index can be reset by locating the Driver Information Centre (DIC) on the turn signal lever (refer to photo). Here you will find a scrolling thumbwheel and a SET/CLR button. Once located you can do the following to reset the light:
1) Turn the ignition to run (one position before starting the engine).
2) Press the DIC MENU button on the turn signal lever to enter the Vehicle Information Menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3) Press the SET/CLR button to reset the oil life to 100%.
4) Turn the ignition off and start the engine to verify the reset is complete. If the “Change Engine Oil Soon” message is still on; repeat steps 1-3.
Buick recommends the following fluids to be used:
1. Engine Oil – Dexos
2. Engine Coolant – DEX-COOL
3. Brake Fluid – DOT 3 Hydraulic Brake Fluid
4. Automatic Transmission – DEXRON VI Automatic Transmission Fluid
To reset the 2015 Subaru Impreza, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl…
The 2015 Toyota Corolla is equipped with the Toyota Maintenance Data System. After performing the oil change, the oil change indicator will need to be…
GM recommends for the 2013 Buick Verano “Use only engine oil licensed to the dexos1® specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.”
Based on this recommendation, we can assume the vehicle comes factory filled with a dexos1 Synthetic Blend.
How many quarts of oil will my 2013 need to change the oil
Hi Tommy,
Depending on the engine it will take the following amount with the oil filter installed:
2.0L – 6.0qt.
2.4L – 5.0qt.
Can You please let me know when a Buick Verano 2013 comes from
the factory, what kind of oil is used. Is it a synthetic blend
or regular oil.
Thank You
Hi Maryann,
GM recommends for the 2013 Buick Verano “Use only engine oil licensed to the dexos1® specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.”
Based on this recommendation, we can assume the vehicle comes factory filled with a dexos1 Synthetic Blend.