The 2013 Toyota Land Cruiser is offered in a gasoline model. After performing an oil change the maintenance data will need to be reset. Follow these steps to reset this light:
1. Press the “ENGINE START STOP” switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine). Continue to press and hold the button until “COMPLETE” appears on the multi-information display.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 8 Cyl. 5.7L Gas |
Motor Oil | 0W20 |
Oil Capacity w/Filter | 7.9 US qt. (7.5L) |
Brake/Clutch Fluid | Dot 3 |
Engine Coolant | Toyota Super Long Life Coolant |
Automatic Transmission | Toyota Genuine ATF WS |
Power Steering Fluid | DEXRON II or III |
Differentials | Toyota Genuine Differential Gear Oil LT 75W-85 |
Transfer Case | Toyota Genuine Transfer Gear Oil LF SAE 75W |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 8 Cyl. 5.7L Gas |
Oil Filter | L25702 |
Air Filter | A55799 |
Cabin Filter | C35667 |
I whant how reset the fule meaintenc light.after replace the fuel filter