2006 Mercury Grand Marquis

1. Turn the ignition to run (one position before starting engine).
2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed.
3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% "OIL LIFE XXX% HOLD RESET IF NEW OIL" is displayed.
4. Press and hold the RESET control for three seconds and release. Oil life is set to 100% and "OIL LIFE START VALUE SET TO XXX%" is displayed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Cadillac Escalade

To reset the 2015 Cadillac Escalade oil life, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC.

2015 Cadillac Escalade Steering Wheel Controls

2011 Lincoln MKT

1. Turn the ignition to run (one position before starting engine).

2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".

3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Chevrolet Corvette

To reset the 2015 Chevrolet Corvette oil life remaining, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING.
3. Press and hold the SEL button until REMAINING OIL LIFE 100% appears.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Chevrolet Corvette Steering Wheel Controls

1. Turn the ignition to (II) - do not start the engine.
2. Press the SEL/RESET button on the steering wheel until you see the engine oil life display.
3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
4. Select RESET by pressing the INFO (up/down) button
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Nissan Pathfinder

To reset the 2015 Nissan Pathfinder maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
2. Press the square button , located on the steering wheel to the left, to display the SETTINGS mode.
3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
6. Repeat for any other MAINTENANCE items.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Nissan Pathfinder Steering Wheel Controls

2007 Nissan Altima

1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
2. Press the square button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode.
3. In the setting mode screen press the circle button to move to MAINTENANCE.
4. Set a desired interval by pushing the circle button to highlight ENGINE OIL and pressing the square button. The reset mode will open up and allow you to enter the desired distance.
5. Select RESET and select new time or distance.
6. Repeat step 3 for ENGINE OIL FILTER.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Nissan Altima

To reset the 2015 Nissan Altima maintenance light, please follow these instructions:

2015 Nissan Altima Steering Wheel Controls

2015 MAZDA6

To reset the 2015 MAZDA6 maintenance monitor, please follow these instructions:

1. Turn the ignition to run (do not start the engine).
2. Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm.
3. Scroll to MAINTENANCE and press the INFO button to confirm.
4. Scroll to the item that needs to be reset (SCHEDULED, TIRE ROTATION, TIRE PRESSURE) and confirm with the INFO button.
5. Scroll to SET TIME or SET DISTANCE and confirm with the INFO button.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 MAZDA6 Steering Wheel Controls

1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off.
2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are
are displayed. The symbol and distance display will start flashing and the display shows the current interval (ie. 5000KM).
3. Push the trip button to increase the interval distance. Each step increases the interval by 1000km. The interval distance can be set up to 30000km after the display returns to 0.
4. If no further action is made, the display returns to the previous mode and the new interval is set. If the interval distance is set to 0, the display will skip the maintenance information when the ignition is placed in run or start mode.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.