To reset the 2016 Toyota Camry maintenance data after an oil change, please follow these instructions: non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip metre A reading is shown. Turn ignition off. Vehicles with smart key system: 3.While pressing the trip meter reset button, press the […]
To reset the 2016 Subaru Impreza maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use the Up or Down arrow
To reset the 2016 Smart ForT wo service light after an oil change, please follow these instructions: 1. Close all doors, hood and trunk. 2. Turn ignition to position “1” (do not start the engine). 3. Press the scroll forward button on the end of the windshield wiper lever repeatedly until “Total distance” appears in
To reset the 2016 Scion tC maintenance light after an oil change, please follow these instructions: 1.Start engine. 2. Select trip metre A reading by using the trip metre button and then turn the ignition off. 3. While pressing the trip meter reset button, turn the ignition switch to run (one position before starting engine).
To reset the Ram 1500 oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the steering wheel controls, press the DOWN button repeatedly to scroll to VEHICLE INFO. 3. Press the RIGHT arrow to access VEHICLE INFO and then UP or
Reset the 2016 Nissan Altima maintenance settings after an oil change with these instructions: 1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode. 3. Use the up/down
Reset the 2016 Mitsubishi Lancer service reminder after an oil change by following these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from
To reset the 2016 Mini Cooper service light after an oil change, please follow these instructions: 1. Press the start/stop button once (do not start the engine). 2. Press and hold the Trip/Reset button for approximately 10 seconds until the first service job appears in the display. Scroll the service menu by repeatedly pressing the
To reset the 2016 Mercedes C-Class maintenance information after an oil change, please follow these instructions: 1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (house icon located on the left of the steering wheel) repeatedly until the menu item TRIP is highlighted in the
2016 Mercedes C-Class Maintenance Information Reset Read More »
To reset the 2016 Mazda3 maintenance light after an oil change, please follow these instructions: 1. Press and hold the TRIP button with the ignition switched off. 2. Continue to hold the TRIP button and switch the ignition on. 3. After 5 seconds the master warning light will flash for a few seconds to indicate
