The 2000 Pontiac Grand AM oil change light comes on when the vehicle is due or past due for an oil change service. This is not based on mileage, but on engine revolutions and engine operating temperature. When the computer has calculated that the oil needs changing, the GM Oil Life System will indicate that […]
2000 PONTIAC Grand AM Oil Change Light Reset Instructions Read More »
To reset the 1999 Pontiac Firebird oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the TRIP/OIL RESET button on the instrument panel for 12 seconds. The CHANGE OIL light will start to flash to confirm that the system is reset when the flashing
1999 PONTIAC Firebird Maintenance Light Reset Instructions Read More »
To reset the 1998 Pontiac Firebird oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. The Change Oil message flashes for 5 seconds when reset. 3. Turn the ignition off
1998 PONTIAC Firebird Maintenance Light Reset Instructions Read More »
Porsche recommends the use of a reset tool.
2003 PORSCHE Cayenne Maintenance Light Reset Instructions Read More »
To reset the 2009 Nissan GT-R maintenance light, please follow these instructions: 1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use the NEXT button (circle)
2009 NISSAN GT-R Maintenance Light Reset Instructions Read More »
To reset the 2007 Mitsubishi Outlander maintenance light, please follow these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”. When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to “ON”.
2007 MITSUBISHI Outlander Maintenance Light Reset Instructions Read More »
To reset the 2006 Nissan Quest maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF
2006 NISSAN Quest Maintenance Light Reset Instructions Read More »
To reset the 2007 Nissan 350z maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button. 3.
2007 NISSAN 350z Maintenance Light Reset Instructions Read More »
To reset the 2005 Mercury Montego change oil light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine
2005 MERCURY Montego Maintenance Light Reset Instructions Read More »
To reset the 2005 Saab 9-7x oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen. 3. Press and hold the select button on the DIC for 5 seconds while ENGINE
2005 SAAB 9-7x Maintenance Light Reset Instructions Read More »
