The 2006 Mercury Grand Marquis oil change light comes on at fixed intervals. When the engine oil life remaining is 5% or less, a “CHANGE ENGINE OIL” message is displayed. As the oil life decreases and reaches between 5% and 0%, a “CHANGE OIL SOON” message will appear. Once the oil life reaches 0%, an […]
2006 MERCURY Grand Marquis Oil Light Reset Instructions Read More »
To reset the 2015 Cadillac Escalade oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE. 3. Press SEL on the DIC controls. 4. Hold SEL down for a
2015 Cadillac Escalade Oil Life Reset Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2011 LINCOLN MKT Maintenance Light Reset Instructions Read More »
To reset the 2015 Chevrolet Corvette oil life remaining, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING. 3. Press and hold the SEL button until REMAINING OIL LIFE 100%
2015 Chevrolet Corvette Oil Life Remaining Reset Read More »
1. Turn the ignition to (II) – do not start the engine. 2. Press the SEL/RESET button on the steering wheel until you see the engine oil life display. 3. Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown
2006 ACURA CSX Maintenance Light Reset Instructions Read More »
To reset the 2015 Nissan Pathfinder maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button , located on the steering wheel to the left, to display the SETTINGS mode. 3. Use the up/down arrow buttons to highlight SETTINGS
2015 Nissan Pathfinder Maintenance Light Reset Read More »
1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode. 3. In the setting mode screen press the circle button to move to MAINTENANCE. 4. Set a desired
2007 NISSAN Altima/ Hybrid Maintenance Light Reset Instructions Read More »
To reset the 2015 Nissan Altima maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button (□) , located on the steering wheel to the left, to display the SETTINGS mode. 3. Use the up/down arrow buttons to highlight
2015 Nissan Altima Maintenance Light Reset Read More »
To reset the 2015 MAZDA6 maintenance monitor, please follow these instructions: 1. Turn the ignition to run (do not start the engine). 2. Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm. 3. Scroll to MAINTENANCE and press the INFO button to
2015 MAZDA6 Maintenance Monitor Reset Read More »
1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. 2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are are displayed. The
2009 NISSAN Cube Maintenance Light Reset Instructions Read More »
