The 2013 Toyota Prius is offered in a hybrid gasoline model. Â After performing an oil change, the maintenance data must be reset. Â Follow these steps to reset this light:
1. Press the “ENGINE START STOP” switch once (do not start the engine) or turn the ignition key to run (one position before starting the engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start the engine).
4. Continue to press and hold the button until the trip meter displays “000000” and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids, you will need to use the following specifications:
| Engine Size | 4 Cyl. 1.8L Gas |
| Motor Oil | 0W20 |
| Oil Capacity w/Filter | 4.4 US qt. (4.2L) |
| Brake Fluid | Dot 3 |
| Engine Coolant | Toyota Super Long Life Coolant |
| Automatic Transmission | Toyota Genuine ATF WS |
You can cross reference the following Purolator filter numbers for your own application:
| Engine Size | 4 Cyl. 1.8L Gas |
| Oil Filter | L16311 |
| Air Filter | A26114 |
| Cabin Filter | C35667 |
Want to learn more about your 2013 Toyota Prius and how to perform basic maintenance items? Visit our e-store for the:Â
