The newer ML models have an updated steering wheel with directional arrows on the left and hands free buttons on the right. To perform this reset you will need to use the steering wheel controls.  Please follow these steps: To perform this reset you will need to use the steering wheel controls.  Please follow these steps: […]

For the 2013 Toyota 4Runner, after performing an oil change the MAINT REQD light can be reset by doing the following: Switch the display to the trip meter A when the engine is running. Vehicles without a smart key system Turn the engine switch off. Vehicles with a smart key system Turn the “ENGINE START

As a result of a question raised by Brad.  I thought I would share with you how the Honda Maintenance Minder system is structured and how it is reset.  Not only does this system tell you when to change the oil (based on Honda’s recommendations) but also when to service other items (based on Honda’s

For the 2013 Toyota Corolla, after performing an oil change the MAINT REQD light can be reset by doing the following: 1) Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2) Ensure Trip Metre A reading is shown. Turn the ignition

After performing the oil change the “Change Engine Oil Soon” index can be reset by locating the Driver Information Centre (DIC) on the turn signal lever (refer to photo).  Here you will find a scrolling thumbwheel and a SET/CLR button.  Once located you can do the following to reset the light: 1) Turn the ignition

After performing the oil change the “Change Engine Oil Soon” index can be reset by locating the Driver Information Centre below the radio (refer to photo).  Here you will find 4 buttons but you will only need to locate the button with a car and the letter “i” (vehicle information button).  Once located you can

When the maintenance wrench comes on or the vehicle has received an oil and filter change the maintenance minder system will need to be reset.  Here are the instructions: 1) Turn the ignition to run (one click before starting the engine). 2) Press the TRIP/RESET knob repeatedly until the engine oil life indicator % is

When the maintenance wrench comes on or the vehicle has received an oil and filter change the maintenance minder system will need to be reset.  Here are the instructions: 1) Turn the ignition to run (one click before starting the engine). 2) Press the SELECT/RESET knob repeatedly until the engine oil life indicator % is